Window Repairs
Window repairs can help homeowners save money and maintain their comfort. In the event of serious damages, like broken glass or a shattered frame, a window replacement could be necessary.
Many other issues can be fixed to extend the life of windows. Common issues include:
Cracked or broken panes
It’s a rock that’s been that was tossed by your lawnmowers or a tree branch blown by high winds, cracked windows are not just ugly, but it can also result in higher electric bills since the broken pieces allow cold air to enter your home. Luckily, it’s typically simple to repair windows with broken panes.
Begin by carefully removing glass with gloves and safety glasses. You may need to use an utility knife to remove old glazing compound or putty around the frame’s edges. Next, wipe down the glass’s surface and the frame’s wood using a soft cloth or paper towel.
After cleaning the area, apply a silicone caulking that is waterproof to the frame’s perimeter. This helps prevent water from getting into the crack, which can cause further damage to the frame and the glass.
A bad crack in double glazed window repairs near me-paned glass could affect the gas between the panes, making your windows less insulative. If the crack is severe enough to threaten the integrity of the glass or the glass has an inner pane that’s totally missing, it’s time to call in a professional.
Cracks in the glass caused by thermal stress may occur when there is a significant temperature difference inside and outside your home. This causes the glass to expand and contract. If this happens on two portions of a window it’s recommended to replace the window instead of trying to repair it.
Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It will also keep out cold winds and bugs. You can also cut the length of a nylon stocking to completely cover the crack and glue it with duct tape. This isn’t a permanent solution, but it works well in a pinch and it keeps insects and cold air from entering your home. If you notice cracks appearing on the windows of your old ones You should consult the local company to determine whether replacing the entire window is a better option.
Rotten Wood
Wood rot is a common problem for windows. It can alter the appearance of a house and also pose danger to your safety. It is, however, possible to repair rotted wood. The first step is to ensure that the root of the rot has been taken care of. This can be done by examining for leaks in the roof and gutters that aren’t functioning or cracked caulking, as well as other areas which allow water to penetrate the wood.
Next, you will need to take out any rotten parts of the window frame. This can be accomplished with the claw hammer, chisel, or rasp. After removing the decayed wood, you’ll need to replace it with new wood. Pre-treated wood is recommended for this project, as it is resistant to decay. If you cannot replace the damaged timber you can apply wood filler and hardener to repair the damaged area. This kind of product can be found in a lot of hardware stores. Follow the instructions on the label of the product to ensure the most efficient results.
Once you have replaced the decayed areas of the windowsill, it’s important to protect the repaired area. Apply a water-resistant sealant to the wood. Sikkens, for example is a fantastic product to use.
Use a two-part epoxy to safeguard the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried, you can rub the wood’s surface. Start with a rough sandpaper, then move to more smoother grades.
The final thing you want to do is make the area that has been damaged by exposing it to more water. Therefore, it is recommended to cover the repaired area with an oil-based primer that will help protect it from moisture. Then, you can apply the waterproof wood sealant.
The W won’t let you open
There are many reasons why windows won’t open. The house might have shifted, or the wood frames could have warped during rainy weather. Someone might have also secured them with a nail for security. However, with a bit of patience and the right tools, most windows that are locked can be opened.
Gunk or debris that has accumulated can be a major reason of windows that aren’t opening. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges, and locks. Metal hardware can also rust when it comes into contact humidity and direct sunlight. Making sure these areas are lubricated with spray grease will help prevent corrosion and keep your window functioning correctly.
The pulleys used to raise or lower the window may be loosened, or break. These components can lose their tension and cause obstruction especially when the window is two or more stories higher than the ground.
If you’re having trouble opening the window, try using a pry bar to gently force the window to open a bit at each time. Place a block of wood on the frame to give your pry bar more leverage, and be sure not to harm the window or the wood. Alternatively, try running a hair dryer around the edges of the frame for several minutes to warm the wood and assist it move more easily.
A faulty spring can also be the cause of a window that won’t raise or lower. You will need to consult your owner’s guide for more details depending on the person who made your windows.
If you’ve tried cleaning the moving parts of your windows and lubricating them but they’re still not opening it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don’t let windows in your home go from functional to inoperable. If a window isn’t properly shut can leave your home vulnerable for water damage and burglary. Contact our team today to learn more about our replacement windows and our services!